Print

How to ...

A short guide to brush:

 

  • I want to achieve a higher high-low effect:

The surface of the existing material should be roughened before brushing. The rougher the high-low effect will be the greater. These flexible brushes must be used with long bristles that can penetrate into the deep places.

  • I want to achieve as smooth, even surface:

Make use of our brush with dense stocking type "extreme". These act like a grindstone. Our Bürstschleifmaschine SZ1 delivers with this brush a uniform scratch pattern coarsest grits without Trassierspuren. In Belgium, the bluestone color achieved "light blue". Sanding and polishing can be achieved and to be distinguished from a grinding with grindstones hardly.

  • I want to treat gap rough material / surface leveling tips / I just want to defuse abgeflammtes Material:

Use our hard brushes from Type "Line strengthened" or "Power" or "big bunch". Use only coarse grains, which do not alter the depth of shade, or finer grits only to re-achieve the original color depth.

  • I want to achieve an abrasion on the fastest way:

Use brush type "little bundle" or "filled" with low stocking. Note: a knife cuts is always better than a hammer (is to say: not the mass makes it). Use Stracke (resinierte) bristles that can not be easily flattened. The longer exposure is important - no means of pressure.

  • I want to brush edges and do not damage the chamfers or top this:

Use brush shape "Turbo" to polishing. In flamed surfaces, the edge is machined to match the surface with a brush grain DIA 36th Also Fasenbürsten we can deliver. The whole view is processed the same color in demand than ever.

  • R9-R10 Rutschhemmklassen:

With our diamond brushes with coarse grain is surface with Rutschhemmklassen R9 and more can be achieved. The repetition after several years to re-attain the roughness is possible at any time with the same DIA brush graining. Existing smooth flooring can be roughened and then surefooted.

  • Gate-heels, saw marks:

Such paragraphs on flat surfaces must first etc with a grinding stone grain 46 be leveled. No brush, no DIA-brush, is able to flatten this paragraph. The paragraph would be able to see clearly after brushing.

  • Brush material-backs:

After the use of diamond brushes no difference between the processing of ground or polished front surface or a saw-rough back side can be seen. But gate or saw discs-paragraphs must be leveled before.

  • Hand machine -stationäre run machines:

With one hand or machine Wandarmmaschine can skip individual grains. The multiple coating the surface with the next grain compensates for this. Edging machines or automatic grinding machines require appropriate material small and consistent gradation.

  • Different surface optics:

With brushes are several combinations can be performed and the latest unprecedented optics emerge. So when hard rock performs a first slide brush grain 36 or 60 and a subsequent DIA Brush in 1000 to a shine only the tops with remaining matt depth (tried at Jacaranda and div. Dark varieties).

 

That goes also vice versa! Invent simply something new.

The variety has no limits.